Print Page | Close Window

Verticallaabels on Chart x-axis

Printed From: Crystal Reports Book
Category: Crystal Reports 9 through 2020
Forum Name: Report Design
Forum Discription: The best way to design a report and problems you have encountered
URL: http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=83
Printed Date: 06 May 2024 at 7:37am


Topic: Verticallaabels on Chart x-axis
Posted By: sirlansa
Subject: Verticallaabels on Chart x-axis
Date Posted: 02 Jan 2007 at 6:37am
I have a chart with long labels for the datapoints on the x-axis.
The default rotation is NORMAL, with the label parallel to the axis. Whenever I set the orientation to 90 (perpendicular to the axis), it reverts to 45. Because of this, all the labels on the axis don't show up and only every other one shows up in the finished report.
 
Is this a bug in Crystal XI, or is there a way to get it to work as expected.?


-------------
Sir Lansa


Replies:
Posted By: WLWes
Date Posted: 12 Jan 2007 at 8:36pm
I tried this in CR 8.5 and with CR XIR2 (with SP1 and MHF1 applied) and did not have your problem with either


Print Page | Close Window